Master Thesis: Model Predictive Control for Engine Actuator Coordination

Investigating the Impact of Model Fidelity

Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future. If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.

Background

Heavy-duty powertrains must meet increasingly stringent requirements on nitrogen oxides (NOx) and carbon dioxide (CO₂), while development cycles are becoming shorter. This increases the need for simulation environments that can evaluate control concepts early, reduce dependence on physical testing and support faster, more robust development.

Modern engine control is a multivariable problem. Exhaust gas recirculation (EGR), variable geometry turbine (VGT), intake throttle and start of injection (SOI) all influence engine-out NOx, boost pressure and exhaust temperature. Model Predictive Control (MPC) is attractive because it can coordinate several actuators, anticipate future system behaviour and explicitly handle actuator and operating constraints.

A physics-based 0-D engine model is available in MATLAB. However, fast compressor-outlet and intake-manifold pressure dynamics make the model numerically stiff. Straightforward Forward Euler integration therefore requires very small time steps, which can make repeated model predictions inside an MPC computationally demanding. The thesis will investigate what model fidelity is needed to achieve useful closed-loop performance at an acceptable computational cost.

Where You’ll Belong

Volvo Group Powertrain Technology provides Volvo Group Trucks and Business Area’s with state-of-the-art research, cutting-edge engineering, product planning and purchasing serives, as well as aftermarket product support. The Powertrain Engineering Sweden organization has the full worldwide product platform responsibility for heavy duty engines and transmissions with a large organization of 750 colleagues in Gothenburg and Malmö.

Why Choose This Thesis?

• Work on a current industrial challenge at the intersection of engine technology, control engineering and numerical modelling.

• Gain hands-on experience with MPC, physical 0-D models, reduced-order modelling and data-driven or grey-box identification.

• Use both steady-state and dynamic data, and validate the work in a MATLAB/Simulink-based simulation environment.

• Deliver results that can guide future model-based control, calibration and simulation development

Scope and Content

The work will be performed by two master’s thesis students as a joint project. The recommended core scope is to establish a reproducible simulation and evaluation chain before adding complexity. The students will work together across modelling, control design, integration and analysis.

Work package Main activities:

• Baseline and integration: Integrate and verify the existing physics-based 0-D engine model in MATLAB into Volvo’s MATLAB/Simulink environment. Define interfaces, operating conditions, signals and baseline test cases.

• Numerical feasibility: Characterise the model stiffness and evaluate suitable approaches for efficient simulation, for example implicit integration, model reformulation or time-scale separation. Document the trade-off between accuracy, robustness and execution time.

• Prediction models: Develop and compare MPC-oriented model alternatives, such as the full 0-D model, a reduced 0-D representation, linearised models and a grey-box identified model using ODYS software and available steady-state and dynamic data.

• MPC development:Develop an MPC controller in MATLAB/Simulink. The target actuator set is EGR, VGT, throttle and SOI, with engine-out NOx, boost pressure and exhaust temperature as key controlled variables. A staged implementation may begin with a smaller input/output set.

• Integration and benchmark: Integrate the MPC controller in Volvo’s simulation environment and compare it with the existing cIMC controller using common transient simulation cases. Evaluate tracking, constraint handling, actuator activity, robustness to model mismatch and computational effort.

• Conclusions and recommendations: Identify the model fidelity required for practical MPC, explain where MPC provides value compared with traditional control, and recommend next steps for continued development.

Who are you?

We are looking for two motivated students who will complete this thesis together. The project suits a pair with complementary strengths in control, modelling, simulation and data analysis.

The key qualifications include:

• Strong skills in modeling and control system
• Interest in optimisation, numerical methods and dynamic system simulation
• Proficient in MATLAB/Simulink
• Ability to work systematically with data, software integration and technical evaluation
• Good communication and collaboration skills
• Knowledge of combustion engines, engine air-path systems or system identification is a plus
  

Ready for the next step?

Want to kick-start your career? Please apply now, last application date is 14th of October. Attach the course transcription inclusive grade together with the CV.

We value your data privacy and therefore do not accept applications via mail.

Thesis level: Master Thesis 30p

Language: English

Starting date: January 2027

Supervision and examination:
- Powertrain Technology, TTI, Volvo Group
- Chalmers

Who we are and what we believe in
We are committed to shaping the future landscape of efficient, safe, and sustainable transport solutions. Fulfilling our mission creates countless career opportunities for talents across the group’s leading brands and entities.

Applying to this job offers you the opportunity to join Volvo Group. Every day, you will be working with some of the sharpest and most creative brains in our field to be able to leave our society in better shape for the next generation. We are passionate about what we do, and we thrive on teamwork. We are almost 100,000 people united around the world by a culture of care, inclusiveness, and empowerment.

Trucks Technology & Industrial Division hire team players who are ready to create real customer impact. Our decentralized teams work close to our customers, with speed and autonomy, to build what they truly need.
Join us to collaborate on innovative, sustainable technologies that redefine how we design, build, and deliver value. Bring your curiosity, your expertise, and your collaborative energy, and together, we’ll turn bold ideas into tangible solutions for our customers and contribute to a more sustainable tomorrow.